How To Build Your PC Is Really Easy

Assemble your own computer can be really fun, and it's easier now than ever before. However, there are few moments when assembling a system, and attach a CPU fan can be one of them. The last thing you want is your new expensive processor with a bent pin, but if you do, here's how to fix it.

Build your own computer can be really easy, and gives you the most common in the customization options. If you want to try it, you try to see the guide First-Timer's Guide to Building a Computer from Scratch. However, building a system with more experience can attest to how scary it can be when you mount a CPU fan or heat sink and you're not sure how much power to put on it to make it fit.

In most cases, you get it sorted without any hassle, but in the worst case scenario, you take a fan, popping the CPU, and find your worst nightmare: a new CPU you have a group of pin that was pressed on the bottom. Thankfully, MarauderFox Instructables website shows the use of plastic cards (such as credit card or ID card,) a Swiss Army Knife, and a steady hand to fix the problem.

Just use a knife to slowly and gently to set up the pins are bent back. Then use a plastic card to make sure the pins bent into a perfect standing with all the others around him. Use cards from various angles to make sure it is perfect with the line.

Finally, the ease of the processor back into place, making sure each slide pin into the hole. If not applicable, you should be able to feel the areas that do not match and repeat the process again. It is important to be gentle, because you do not want to damage the pins by trying to bend them back and forth.